Posted on Leave a comment

How to Attach Wide Leather Ends With Rivets

Wide leather jewelry lends a casual, boho chic look that lets everybody know you’re lovin’ life. It’s classic, it’s cool… but sometimes it’s a bit intimidating to work with on your own. Wide leather tends to be thick and stiff just off the spool, but that’s no reason to not make jewelry with it! And that’s because using rivets makes finishing wide leather jewelry easy!

So in this post, we’re going to show you how to punch a hole in your leather and attach a leather end piece using a metal rivet. With this technique, you can make something like this!

To begin, you’re going to need some tools and materials.


  • Flat Wide Leather
  • 2 Leather Strap Ends
  • 2-4 Sets of Rivets


  • Marker
  • Leather Punch Pliers
  • Bench Block
  • Chasing Hammer
  • Scissors

And now let’s get to the fun part and start making!


  1. Measure out the length of leather you are using for your project. Be sure to subtract from the leather length the length of the clasp you will be attaching.
  2. Place your leather strap end on the end of the leather and mark where the hole lands.

  1. Using the largest hole on the leather punch pliers, punch a hole where you marked the leather.

  1. The rivets we’re using and that we sell come as a pair. The back has a dimple on the bottom of it and the front looks like a little mushroom cap. The back rivet fits inside of the front one. Take the back rivet and put it through the back of the leather and the leather strap end. Take the top rivet and place it on top of the back rivet.

  1. Place your piece on a bench block and using the flat end of the chasing hammer, hammer the rivet flat so it is tight and the leather strap end can’t move around. The goal is to flatten the rivet without hammering the strap end flat. Repeat on the other end.

And that’s it! From here, you can attach the clasp of your choosing and adorn your leather jewelry however you’d like! And with your new riveting in leather skill, the sky’s the limit!

Posted on Leave a comment

How To Make Adjustable Sliding Knots With Leather (& Our 1st Blog Post!)

WELCOME! We’re so glad you’re here! It’s hard to believe that we’ve been around for 14.5 years and this is our first blog post… but so it goes. We offer so much help every day to our beloved customers in the store that it only makes sense to document the most commonly asked questions to serve as a resource for all jewelry makers! So with that in mind, our blog will teach you basic jewelry techniques, jewelry trends, unveil our new products, discuss local Grand Haven area happenings, and undoubtedly much more!

Summer is definitely here in our little beach town and one of the most popular jewelry materials is leather! And there’s no wonder leather is here to stay – it’s versatile, durable, comes in tons of different thicknesses, colors, and finishes so it goes with just about anything.

See what we mean?

It can be feminine or masculine – perfect for last minute father’s day gifts!

Not to mention that it’s simple, natural, and it can create the easiest adjustable necklace or bracelet, without a clasp!

This particular technique is often called a sliding knot or a slipknot. Knowing how to tie a sliding knot is a tremendous tool that will come in handy more often than you think. We tie them all the time! They’re great for kids who can’t or don’t want to use clasps and who grow an inch a day, for gifts when you don’t know the recipient’s preferred necklace length or wrist size, and for those times you just want something simple and easy to showcase a pendant or a few knotted beads on.

This is the classic sliding knot we’re talking about:

You’ll notice we have two leather strands on the far sides of the knots and three strands in the middle. This is because this particular design is using one looped piece of leather to connect to two different ends of the centerpiece. But don’t let this confuse you, the technique is the same!

First, you’ll want to take your desired bracelet or necklace size and double it to get the proper length for your adjustable leather piece. When everything is assembled, it’s time to tie your knots.

  1. Cross your ends, one over the other, leaving about 4 inches on each end.
  2. Choose your working cord (left or right) and double it back halfway through its tail; hold this fold with your thumb and pointer finger.
  3. Take the end of the doubled back working cord and wrap it around all of the cords twice.

4. Now slide the working cord’s end back through the wrapping loops, exiting through the initial fold.

5. Pull the ends to tighten the knot.

6. Repeat these steps on the other side.

7. Glue each knot, making sure not to glue the knots to the cords that it needs to slide over, and trim the tails.

And, VOILA! That’s how to make a sliding knot!

By the way, we have tons of great pendants, wide-holed glass, clay, wood, and even pearl beads for you to design your perfect summer jewelry pieces!

So come on down to lovely Grand Haven and say hello! We’ll be here all week 😉